How To Fix Electric Car Window

Introduction

Electric car windows are a great convenience, allowing you to control the opening and closing of your car windows with the simple push of a button. However, like all electronic components, they can sometimes fail, leaving you with a window that won’t open or close. In this blog post, we will explore how to fix electric car windows, saving you time and potentially costly repair fees.

Common Electric Car Window Issues

There are several common issues that can cause an electric car window to stop functioning properly. Some of the most common issues include:

  • Faulty window regulator – This is the most common issue with electric car windows. The regulator is the mechanism that moves the window up and down. Over time, the regulator can become worn or broken, causing the window to stop working.
  • Blown fuse – The fuse for the electric window system can blow, causing the entire system to stop functioning. This is usually an easy fix, as you simply need to replace the fuse.
  • Bad switch – The switch that controls the window may become faulty, causing the window to not respond when the switch is pressed.
  • Broken motor – The motor that powers the window regulator can fail, causing the window to not move.

Diagnosing the Problem

In order to fix the electric car window, you first need to diagnose the problem. Here are some steps to follow to help determine the issue:

  1. Check if the problem is isolated to one window or if all windows are affected. If all windows are not working, it could be a blown fuse or faulty master switch.
  2. Listen for any sounds when you press the window switch. If you hear a grinding or clicking noise, it could indicate a problem with the window regulator or motor.
  3. Inspect the window for any visible damage or obstructions that could be preventing the window from moving.
  4. Test the window switch to see if it’s functioning properly. You can do this by using a multimeter to check for continuity when the switch is pressed.

Fixing the Electric Car Window

Once you have determined the cause of the problem, you can move on to fixing the electric car window. Here’s how to address each of the common issues:

Faulty Window Regulator

  1. Remove the door panel to access the window regulator assembly.
  2. Disconnect the wiring harness and any connectors from the motor and regulator.
  3. Remove the bolts holding the window regulator in place, then carefully remove the assembly from the door.
  4. Install the new window regulator, making sure that it is properly aligned and tightened down.
  5. Reconnect the wiring and connectors, then test the window to ensure it is functioning properly.
  6. Reinstall the door panel.

Blown Fuse

  1. Locate the fuse box, often found under the dashboard or in the engine compartment.
  2. Refer to the owner’s manual to identify the correct fuse for the electric window system.
  3. Remove the blown fuse and replace it with a new one of the same rating.
  4. Test the window to ensure it is functioning properly.

Bad Switch

  1. Remove the door panel to access the window switch assembly.
  2. Disconnect the wiring harness from the switch.
  3. Remove the faulty switch and replace it with a new one.
  4. Reconnect the wiring and test the window to ensure it is functioning properly.
  5. Reinstall the door panel.

Broken Motor

  1. Remove the door panel to access the window motor assembly.
  2. Disconnect the wiring harness and any connectors from the motor.
  3. Remove the bolts holding the motor in place, then carefully remove the motor from the door.
  4. Install the new motor, making sure it is properly aligned and tightened down.
  5. Reconnect the wiring and connectors, then test the window to ensure it is functioning properly.
  6. Reinstall the door panel.

Conclusion

In conclusion, fixing an electric car window can be a relatively simple task if you are able to diagnose and pinpoint the problem. Following the steps outlined in this blog post should help you fix your electric car window and get it back to functioning properly. However, if you are unable to diagnose the issue or feel uncomfortable performing the repairs yourself, it is always best to seek the help of a professional mechanic.